The first Schonstedt pipe and cable locator with "‘Dual Mode’", Loki can simultaneously detect transmitter and power signals for a more precise locate to assist in reducing utility strikes.

Three active frequencies (low, medium and high) are available to support the detection of different cable types in varied environmental conditions.

The Contractor model is Schonstedt’s first pipe and cable locator for sale with 131 kHz and is now the highest frequency Schonstedt offers.

Depth readings in transmitter, sonde and power modes are automatically displayed on the receiver. Choose between metric or imperial locator models.  

Easy to switch between active, inductive, sonde and passive location modes, Loki can identify and differentiate between a broad range of utilities.

NoiseProtect™ allows the operator to locate pipes and cables in electrically noisy environments such as near power sub stations or near overhead high-voltage cables.

It identifies and automatically rejects electrical interference that may otherwise overload the Loki locator’s electronics.

Shallow cables are a common cause of cable strikes, damage and injury. Loki has a built in ShallowAlert™ feature, warning the operator of shallow pipes and cables. When a shallow cable or pipe is detected (in power or dual modes), an asterix flashes on the locator screen and sounds a distinctive warbling audio tone. 

As standard, the following items are included within each package; Loki locator w/ batteries, Loki transmitter, batteries for Loki transmitter, direct connect lead, carry bag, earth stake, earth spool with magnet and a user guide.

Great to use for extended periods and rugged enough to survive the rigors of every day usage.

Waterproofing allows users to continue their search for pipes and cables in inclement weather, and even if they are under shallow snow or water!

Users of Schonstedt products can be confident in the low total cost of ownership of their purchases because they are supported by a 1 year warranty.

When your hands are full of your other kit, and the site is the other side of the field, you’ll be glad of the soft case to help you transport Loki.

Applications

Direct Connection The most effective method for connecting to a valve, meter, junction box or other access point, as long as access is possible.
Sondes Sondes enable cast-iron or non-metallic pipes to be accurately traced, depth determined and the position of blockages accurately identified.
Signal Clamping Safely apply a transmitter signal to a pipe or cable up to 220mm / 8.5" diameter without interrupting the supply.
Induction Conveniently apply a transmitter signal to a pipe or cable when, direct connection or signal clamping is not possible.
FlexiTrace™ Connect the transmitter to a FlexiTrace to radiate a continuous tracing signal from non-metallic pipes and conduits.
Live Cable Connector For applying the transmitter signal to a live cable or mains socket, the most certain method of locating a power distribution system in a street.