Overview for the Topcon LS-80A Laser Receiver
The Topcon LS-80A Laser Receiver works with the Topcon RL-H4C rotary level, as well as other red beam lasers. It helps increase the range for the laser. It has an adjustable bandwidth, so you can control the accuracy level. With alerts to let you know if you are level, it will help ensure that your line is true. It also has an out of range alert.
With a rating of IP-66, the Topcon LS-80A Laser Receiver is protected against dust and water. This makes it useable indoor and outdoor. It also has a rubber outer case that will also help protect it from day to day use, including if it is dropped.
The LCD display, on both front and back, makes it easy to check the data on the Topcon LS-80A Laser Receiver. It runs on AA batteries and will give you up to 80 hours of work time. It also has a built in shut off after 30 minutes, so you do not waste batteries. It can also notify you if your batteries are getting low.
Overview for the Topcon LS-80L Laser Receiver Sensor Detector
The Topcon LS-80L Laser Receiver Sensor Detector is able to allow you to have a longer range when using a red beam rotary laser. The unit can be adjusted for either a fine or course band, which will help improve the accuracy. It has an audible notice for the height, to make sure it is adjusted properly. You can select from 11 different channels to display the data on the LCD display.
With a rating of IP-66, the Topcon LS-80L Laser Receiver Sensor Detector is protected against dust and water. The unit is in a rubber case, so it is also protected against dropping it. It will stand up to a variety of job conditions. It can also be mounted with a Holder 6 bracket, so it will be more stable.
The Topcon LS-80L Laser Receiver Sensor Detector runs on two AA batteries. It will run for up to 120 hours, allowing for plenty of work time on the job site. It will also shut down after 30 minutes if it hasn't been used, to help save the battery life.
Overview for the Topcon LS-80G Laser Detector
The Topcon LS-80G Laser Detector is designed to work with rotary lasers with a green beam. It makes it simple to establish a level line when working with jobs like concrete finishing and sub-base leveling. It has two settings so that you can adjust for better accuracy, fine and course. It also has dual LCD displays that conveniently show measurement data.
By attaching the Topcon LS-80G Laser Detector to a leveling stave, using the optional Holder 6 bracket, it keeps it stable during use. It has a protective rubber covering. It also has an IP-66 rating against dust and water, so it is good for outdoor jobs. As it runs on AA batteries, you have portability and you do not have to worry about power cords. It also has a 30 minute shut off, so it will save battery power.
The Topcon LS-80G Laser Detector has alerts, such as low battery. It also will sound an alert when it is out of range of the laser and when it is level. By using the alerts, it will help keep the work more accurate, as you can avoid errors while working and adjust quicker.